Direct IP Printing
- Open Software Center and search for "Xerox Printer Drivers".
- Click to install that package.
Note: after it finishes it will revert to saying "Install" as if nothing happened. Do not worry about that.
- Open System Settings → Printers & Scanners → **Add Printer**.
- At the top, switch to the **IP** tab.
- The IP can be found on the main printer page.
- Address: Enter the printer IP address (e.g., 10.128.4.x)
- Protocol: LPD
- Queue: leave blank
- Name: Choose any friendly name you prefer.
- If the location or model do not automatically populate, something is wrong. Check that:the printer is turned on, you are either hard wired into the network, or on UOSecure or UOVPN
- Click Add and you're done.
Print Server Settings
If the above method does not work or you are having driver issues, you can try the print server method.
- Open System Settings and add a printer as above.
- Choose the same "Add Printer" workflow.
Settings:
- Address: is-usscentralps.uoregon.edu
- Protocol: LPD
- Queue: Use the exact print queue name from the printer page
(e.g., _Deschutes-120-Xerox_ or _Deschutes-238-milne_)
- Name: Choose a friendly name
- Location: Will not auto-populate; you may enter it manually
- Use: Generic PostScript Printer
- Click Add and you're done.
